Petzl Recall- GriGri 2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • go_browns79
    Member
    Mojave Cowboy
    • Aug 2010
    • 67

    Petzl Recall- GriGri 2

    Concerns all Petzl GRIGRI 2’s (D14 2O, D14 2G, D14 2B ) with the first five digits of the serial number between 10326 and 11136.

    Petzl has discovered that exerting excessive force on the fully extended handle of the GRIGRI 2 can cause internal damage, such that the GRIGRI 2 handle may become stuck in the open position.
    When the handle is stuck in this position the assisted braking function is disabled. A damaged GRIGRI 2 in this configuration will function similarly to a manual belay device (e.g. tube style device).
    When using a damaged GRIGRI 2 with the handle stuck in the position as shown in Figure 1, failure to control the braking side of the rope will increase the risk of an uncontrolled descent. A GRIGRI 2 with a damaged handle must be immediately retired from service.
    It is important to note that failure to control the braking side of the rope is a misuse of the GRIGRI 2 under any circumstance (See GRIGRI 2 Technical Notice - pdf file, 2,5Mo).

    As of June 20, 2011, seven damaged products have been returned to Petzl through our worldwide distribution network. Petzl has no knowledge of any accidents resulting from a damaged GRIGRI 2 handle.

    More info can be found at: http://petzl.com/en/outdoor/recall-replacement-grigri-2
    Last edited by go_browns79; 07-03-2011, 09:00 PM.
    Bill
Working...